Specifications
|
Serial Number |
Product Model |
Product Appearance |
Fill Volume |
Maximum current /maximum dose |
Electrode types |
|
01 |
ION-T01 |
|
1.5 cc |
4.0 mA / 80mA-min |
Active drug delivery electrode |
|
02 |
ION-T02 |
|
2.5 cc |
4.0 mA / 80mA-min |
Active drug delivery electrode |
|
03 |
ION-T03 |
|
4.0 cc |
4.0 mA / 80mA-min |
Active drug delivery electrode |
|
04 |
ION-T04 |
|
2.0 cc |
4.0 mA / 80mA-min |
Active drug delivery electrode |
|
05 |
ION-T05 |
|
/ |
/ |
Return electrode |
how to set up Iontophoresis
Clean skin in preparation for electrodes
Using a syringe inject the appropriate amount of medication into the pad
Place the electrode with the medication over the target tissue and make sure the electrode is in full contact with the skin, apply the return electrode and prepare to connect the leads.
Driven by the host current, the drug ions enter, the human body through the skin to achieve the effect of drug delivery.
Features
Using the ion introduction method to drive drugs into the body
Applicable to inject soluble salts or other drugs into the body for medical purposes;
4 different signal electrode pieces, applicable to different drug capacity;
Used with the iontophoresis device, which is battery-powered and flexible in use;
Drug is delivered directly to the body through the skin, safe and without side effects
FAQ
Q: How long do you leave an iontophoresis patch on?
A: Some patches may be worn as long as 24 hours. You will not feel pain from the treatment, but you may feel a slight tingling sensation at times where the patch is worn. When you remove your patch, the area in which it was applied may be a bit red, which is completely normal.
Q: How do iontophoresis patches work?
A: How Does It Work? Iontophoresis utilizes an electrical current to push ionized (charged - positively or negatively) medications through the skin. The adhesive patch has 2 poles (positive and negative) where you place your medication depending on their charge.
Q: How should I clean the iontophoresis cortisone patch?
A: To clean the gel pads, wipe them gently with a damp cloth or sponge after use. Avoid using soap, alcohol, or other harsh cleaning agents as they may damage the gel and reduce adhesion.
Q: How often should I use an iontophoresis patch?
A: Initially, the procedure should be repeated for three times per week until the desired results are achieved. Once satisfactory dryness or result has been reached, patients are usually provided with the treatment for once per week. The treatment will take around 15 to 40 minutes depending on the machine.
Hot Tags: iomed patch, China iomed patch manufacturers, suppliers, factory, dexamethasone for iontophoresis patch, iomed patch, ionto pads, iontophoresis cortisone patch, Iontophoresis Pad, Iontophoresis Patches
