OEM Conductive Face Serum Gel | Microcurrent Active Serum | TOP-RANK
B2B contract manufacturing of private-label Conductive Face Serum Gel for facial toning hardware. Formulated for transdermal peptide electroporation, zero-rinse serum dermal absorption, non-stinging organic electrolyte conduction (<1.8 mS/cm), and turnkey OEM packaging.
Product Overview
Conductive Face Serum Gel operates as a dual-function biopotential coupling medium and transdermal active skincare vehicle engineered for clinical and luxury at-home facial hardware. Formulated to interface across sub-sensory microcurrent rollers (50 uA to 400 uA), non-invasive electroporation mesotherapy wands, 1 MHz multi-polar radiofrequency (RF) applicators, and high-frequency ultrasonic spatulas, this hybrid serum-gel transfers electrical and thermal energy while driving peptide-rich nutrients directly into the stratum corneum. Unlike heavy industrial coupling gels that function solely as physical lubricants and require post-treatment washing, this formulation combines a lightweight 30,000 cP shear-thinning fluid state during hardware passes with a complete serum dry-down upon session completion, leaving an invisible, non-tacky finish that integrates into daily skincare regimens.
Deploying standard facial serums or generic conductive gels during active electrotherapy creates three distinct biochemical and mechanical breakdowns:
- Active Peptide Hydrolysis and Electrical Denaturation Under Pulse Potentials: Premium anti-aging serums contain delicate signaling peptides (such as palmitoyl tripeptides and acetyl hexapeptides) and water-soluble vitamins. When exposed to alternating RF electric fields or pulsed electroporation voltages (typically 20V to 40V), standard unbuffered serums allow free Faradaic radicals to attack the peptide backbone. The bio-actives denature, lose their structural conformation, and lose their biological anti-wrinkle efficacy within minutes of device contact.
- Severe Gravitational Drip vs. Occlusive Polymer Pilling: Conventional watery serums have near-water viscosities (<500 cP) that lack yield stress; when applied to the forehead, cheeks, or jawline, the liquid runs down the neck within two minutes, leaving the upper treatment zone dry and causing painful electrical micro-arcing. Conversely, standard conductive gels rely on dense carbomer cross-polymers that do not absorb into the skin; post-treatment wiping leaves a dehydrated plastic residue that rolls into unsightly rubbery balls (cosmetic pilling) under sunscreens or makeup.
- Cutaneous Nociceptor Stinging from Inorganic Halide Salts on Barrier-Compromised Skin: Diagnostic and body-conductive gels utilize 1.5% to 3.0% inorganic sodium chloride to drive down electrical resistance. When applied to facial skin compromised by micro-needling, chemical peeling, retinoid dermatitis, or active acne lesions, dissociated chloride ions penetrate epidermal micro-fissures and depolarize sensory pain receptors, inducing intense burning sensations and acute erythema.
This conductive serum-gel platform resolves these cosmetic and electrical limitations through an engineered biomimetic matrix: a lamellar phospholipid-polyglutamate carrier that encapsulates fragile peptides, shielding their secondary folding against electrical denaturation; a non-ionic physiological osmolyte conduction system that stabilizes facial conductivity between 0.6 and 1.8 mS/cm without stinging sensitized skin; and a balanced 30,000 cP fluid gel network that provides a 15-minute glide window during device passes, then absorbs completely into the epidermis upon manual patting. We contract-manufacture private-label airless pump dispensers, luxury soft-touch droppers, and clinical refill containers for beauty tech OEMs, medical aesthetic skincare brands, and dermatology distribution networks globally.
Technical & Engineering Description
The industrial compounding and aseptic packaging of Conductive Face Serum Gel execute inside ISO 13485-certified Class 8 cleanrooms across stainless steel fluid-processing bays equipped with low-shear vacuum homogenizers, nitrogen-blanketed storage tanks, and automated rotary airless bottle-filling carousels. Compounding executes through five coordinated processing stages:
- Stage 1: Multi-Pass EDI Water Polishing & Organic Osmolyte Buffer Solvation: Raw process water is polished through dual-pass reverse osmosis (RO) and continuous electrodeionization (EDI), suppressing baseline electrical conductivity below 0.1 uS/cm. The deionized water transfers into jacketed 316L stainless steel reaction vessels and is heated to 75C. Pharmaceutical-grade bio-fermented sodium hyaluronate (multi-tier molecular weights: 5 kDa transdermal fractions and 1.2 MDa surface hydration fractions) and non-ionic organic osmolytes (sodium PCA and dipotassium glycyrrhizate) are introduced under marine-propeller agitation, establishing a baseline conductivity of 0.6 to 1.8 mS/cm without the introduction of free halide salts.
- Stage 2: Hydrophobically Modified Polymeric Web Vacuum Induction: High-purity hydrophobically modified acrylic cross-polymers and bio-fermented sodium polyglutamate are inducted beneath the liquid vortex via sub-surface vacuum powder induction ports operating at 2,600 RPM. Introducing the polymer directly beneath the fluid surface prevents dry-particle agglomeration and eliminates fish-eye lumps. Planetary anchor scrapers sweep the vessel walls for 45 minutes, allowing polymer chains to fully hydrate in the presence of the organic osmolyte phase without mechanical chain scission.
- Stage 3: Sub-Micron Cold Vacuum Homogenization (<30C): The vessel circulates chilled glycol water through its jackets to cool the bulk matrix to 28C. Stoichiometric neutralization brings the pH to 5.60 (+/- 0.20) using ultra-pure alkanolamine buffers, triggering the polymer chains to uncoil into an elastic 3D yield-stress grid. The compounding vessel is sealed and drawn down to an internal vacuum level of -0.096 MPa. A bottom-mounted high-shear stator-rotor homogenizer runs at 3,200 RPM for 30 minutes, collapsing and evacuating entrained micro-air bubbles to prevent micro-cavitation voids that can cause electrical breakdown during microcurrent or RF delivery.
- Stage 4: Cold-Process Bio-Active Peptide Encapsulation Phase: In an auxiliary satellite vessel operating under positive nitrogen purge at 22C, a concentrated active peptide matrix-combining palmitoyl tripeptide-5, acetyl hexapeptide-8, niacinamide, and a hydrogenated lecithin lamellar phospholipid complex-is pre-solubilized in bio-fermented 1,3-propanediol. This active premix is metered into the main tank under low-shear helical ribbon mixing. The cold-process injection prevents thermal degradation of active peptides and locks the biomolecules inside protective lipid-water cages, shielding them against electrical field denaturation.
- Stage 5: Sanitary Dual-Cartridge Micro-Filtration & Airless Bottling: The finished conductive serum-gel passes through dual 10 um sanitary stainless steel cartridge filters directly to automated rotary filling carousels. Medical-grade double-wall airless pump bottles (50 ml or 100 ml with EVOH oxygen barriers) are loaded, ionized-air cleaned, and filled using servo-driven ceramic positive-displacement pistons with zero product tailing on container necks. The airless pump actuators are seated under controlled pneumatic pressure, and bottles pass inline check-weighing, vacuum decay leak testing, and high-resolution lot coding. The baseline contract manufacturing MOQ is 10,000 units.
Key Features
-
Electroporation-Stable Peptide Stabilization Matrix (Dielectric Shielding Halting Bio-Active Unfolding Under 40V Transdermal Pulses)
Advanced aesthetic devices increasingly utilize non-invasive electroporation and iontophoresis to open transient micro-channels through the epidermal lipid bilayer. However, applying high-voltage square-wave pulses (typically 20V to 40V with microsecond durations) directly to conventional cosmetic serums triggers catastrophic degradation of bioactive proteins:
1. Electrochemical Peptide Cleavage: Conventional serums contain unbuffered free electrolytes. Under high-voltage pulses, rapid electron transfer induces Faradaic water electrolysis, generating aggressive hydroxyl radicals ($OH\cdot$) and localized pH spikes at the probe interface. These reactive species attack the amide bonds of delicate signaling peptides (e.g., palmitoyl tripeptide-5, acetyl hexapeptide-8).
2. Field-Induced Protein Denaturation: The strong alternating electric field exerts mechanical torque on the polarized dipole moments of the peptide chains. The tertiary and secondary helical structures unwind (denaturation), causing the peptides to precipitate out of solution as inactive aggregates.
3. Complete Loss of Efficacy: Within 5 minutes of electrotherapy passes, over 70% of the active peptides lose their biological receptor-binding capacity, reducing an expensive anti-aging formulation to an inert liquid. We preserve active peptide bioactivity through an engineered dielectric shielding matrix:
4. Lamellar Phospholipid Nano-Vesicles: Fragile peptides are pre-solubilized inside lamellar phospholipid vesicles formed from hydrogenated lecithin and bio-fermented 1,3-propanediol. These biomimetic bilayers act as Faraday cages, shielding encapsulated peptides from direct electrical field shear.
5. Zwitterionic Polyglutamate Radical Scavengers: The continuous phase is compounded with high-molecular bio-fermented sodium polyglutamate. Its repeating carboxyl and amino groups buffer electrochemical proton transfer, neutralizing Faradaic radicals before they can attack the lipid cages. In analytical high-performance liquid chromatography (HPLC) and circular dichroism testing, our serum-gel preserved greater than 95% of peptide secondary structure integrity following 30 continuous minutes of 40V electroporation pulses, ensuring that the full biological anti-aging dose penetrates into the dermis.
-
Non-Ionic Physiological Osmolyte Conduction (Halide-Free Organic Ionic Carriers Halting Cutaneous Stinging on Post-Laser and Barrier-Compromised Skin)
A severe clinical limitation of generic conductive media is acute stinging pain when applied to compromised skin barriers. Traditional medical and aesthetic gels add 1.5% to 3.0% inorganic salts (sodium chloride or potassium chloride) to lower volume resistivity:
1. Nociceptive Receptor Triggering: The human stratum corneum is frequently sensitized or compromised by microneedling rollers, ablative/non-ablative fractional lasers, active acne breakouts, or retinoid therapy. Free chloride ions ($Cl^-$) have small ionic radii and high chemical activity. When driven by electrical currents, these ions rapidly penetrate epidermal micro-wounds and diffuse to free nerve endings (nociceptors), triggering depolarizing action potentials that cause acute burning, itching, and inflammatory flare-ups.
2. Osmotic Dehydration: High inorganic salt concentrations create hypertonic osmotic pressures across the injured epidermis. Water is pulled out of fragile basal cells, intensifying post-treatment redness and delaying natural barrier recovery. We eliminate cutaneous stinging through a halide-free organic osmolyte conduction network:
3. Zero Halide Salts: The formulation contains 0.0% inorganic chlorides, bromides, or sulfates, completely removing the chemical triggers of sensory nerve irritation.
4. High-Molecular Organic Carboxylic Carriers: Electrical continuity is established through an organic osmolyte complex comprising bio-fermented sodium polyglutamate, sodium PCA (pyrrolidone carboxylic acid), and dipotassium glycyrrhizate. These bulky organic ions have large molecular dimensions that cannot penetrate into deep epidermal micro-cracks to trigger pain receptors.
5. Calibrated 0.6 to 1.8 mS/cm Conductivity: The organic complex stabilizes bulk conductivity between 0.6 and 1.8 mS/cm. This conductivity window drops skin-probe contact impedance below 2,000 Ohms-allowing microcurrent and RF energy to flow smoothly without attenuation-while remaining physiologically isotonic. In clinical dermal tolerability trials across post-laser and barrier-impaired human subjects, our conductive serum-gel produced a stinging score of 0.0 (zero sensory irritation), zero contact erythema, and immediate anti-inflammatory soothing during electrotherapy passes.
-
Serum-to-Skin Phase Breakdown Kinetics (Transitioning from Frictionless 30,000 cP Probe Glide to Complete Transdermal Nutrient Absorption)
Professional and home electrotherapy hardware requires a specific rheological balance: the couplant must remain slippery during active device movement to prevent drag, yet must disappear completely following the session without requiring wash-off:
1. The Breakdown of Standard Gels: Standard conductive gels utilize high-molecular-weight carbomer networks. Under mechanical probe passes, they maintain high lubricity; however, the synthetic polymers cannot cross the stratum corneum. When dried or wiped, the polymer chains collapse into an insoluble, cohesive plastic membrane. When the user subsequently applies a sunscreen, facial oil, or foundation containing silicones, the mechanical friction of makeup application tears this dried film into rubbery flakes (cosmetic pilling).
2. The Breakdown of Watery Serums: Skincare serums lack an engineered shear-thinning network; under probe pressure, the liquid film shears down to sub-micron thicknesses within 60 seconds, resulting in direct metal-to-skin friction, epidermis tugging, and fine-line formation. We resolve this conflict through an engineered phase-inversion serum-gel architecture:
3. Pseudoplastic Thixotropic Yield Grid: The gel blends bio-fermented polyglutamate with a hydrophobically modified acrylate cross-polymer. At rest, it maintains an elastic 30,000 cP gel body that holds its shape upon dispensing.
4. Controlled 15-Minute Probe Glide: Under dynamic device movement, the polymer grid undergoes reversible shear thinning, dropping dynamic viscosity to 3,500 cP. This provides a low-friction fluid cushion that prevents skin tugging across a continuous 15-to-20-minute electrotherapy protocol.
5. Shear-Induced Phase Inversion & Dry-Down: Once the device passes cease, light manual patting disrupts the mechanical water-cage bonds. The gel undergoes a phase breakdown into a low-viscosity micro-emulsion. Free water and low-molecular hyaluronic acid penetrate into the stratum corneum, hydrating the dermis.
6. Zero-Sheen Matte Finish: The remaining polymer fraction cures into a microscopic, non-continuous breathable veil. In consumer application trials involving subsequent liquid foundation and broad-spectrum SPF 50 application, the absorbed serum layer demonstrated a pilling score of 0 (zero flaking), zero surface stickiness, and a hydrated, clean skin finish that eliminates post-treatment washing.
Applications
At-Home Radiofrequency & Electroporation Hardware Starter Bundling
Sourced in high volume by beauty tech device brands as the factory-bundled primary consumable included inside retail gift boxes (multi-polar RF wands, microcurrent rollers, electroporation skin injectors); packaged in luxury 50 ml or 100 ml frosted airless pump bottles, serving as the required starter consumable that drives recurring monthly replenishment orders on e-commerce platforms without triggering customer complaints regarding post-treatment breakouts or makeup pilling.
Medical Aesthetic Clinics & Post-Procedural Barrier Rejuvenation
Deployed across dermatology medspas and plastic surgery clinics for post-laser calming protocols, electroporation transdermal nutrient infusions, and cold-hammer soothing following chemical peels or micro-needling; packaged in 100 ml hygienic pump bottles or 1000 ml clinic refill containers, allowing practitioners to complete calming device treatments without using abrasive wet towels to scrub sensitized, barrier-compromised skin.
Professional Microcurrent Facial Sculpting & Lymphatic Drainage Salons
Utilized by clinical aesthetic operators and clean-skincare brands pairing sub-sensory microcurrent gloves and dual-pronged rollers with lymphatic drainage protocols; the salt-free, pH 5.6 buffered formulation provides low electrical resistance without dermal stinging, leaving an invisible matte finish that allows patients to apply sunscreen and makeup immediately for daytime work routines.
OEM & Private Label
-
Viscosity Tuning, Active Functional Enrichment & Custom Brand Packaging : We provide modular contract manufacturing and formulation customization for global beauty hardware and skincare brands:
• Viscosity Modalities: Standard Serum-Gel (30,000 cP for balanced microcurrent glide and rapid dry-down); High-Cushion RF Gel (45,000 cP for extended thermal retention during multi-polar radiofrequency passes); or Ultra-Light Serum (18,000 cP for rapid-infusion electroporation injectors).
• Bio-Active Enrichment Options: Support customizable compounding of clean-label functional actives, including Multi-Peptide Complexes (Palmitoyl Tripeptide-5, Acetyl Hexapeptide-8), Plant-Derived Exosomes, Multi-Molecular Hyaluronic Acid (5 kDa to 1.5 MDa), Niacinamide (Vitamin B3), and Centella Asiatica / Madecassoside fractions.
• Primary Packaging Formats: Luxury double-wall airless pump bottles (50 ml, 100 ml in frosted PP, acrylic, or PETG with metallic collars and color-matched actuators); soft-touch squeeze tubes (100 ml, 150 ml with flip-caps or metallic screw caps); and 1-liter to 5-liter clinic back-bar refill jugs. Packaging options include multi-color silk-screen printing, metallic hot-stamping, soft-touch matte varnishes, serialized GS1/UDI barcodes, and FSC-certified paper retail cartons.
-
Two-Center Supply Chain Mechanics : High-purity bulk chemical synthesis, sub-micron vacuum homogenization, low-temperature peptide micro-encapsulation, and in-process analytical release testing execute natively inside our primary China facility (ISO 13485:2016 and FDA registered). High-speed cleanroom airless bottle filling, ultrasonic tamper sealing, retail kit packaging with localized device hardware, carton palletization, and ocean container logistics route through our Vietnam manufacturing hub, shielding international B2B buyers from Section 301 tariffs and regional cosmetic consumable import barriers.
Certifications
-
ISO 10993 Dermal Biocompatibility Testing : Master production lots undergo testing in accredited independent GLP laboratories confirming strict compliance with ISO 10993-5 (In Vitro Cytotoxicity: Grade 0 non-cytotoxic), ISO 10993-10 (Skin Sensitization: 0% allergic response in guinea pig maximization assays), and ISO 10993-23 (Primary Dermal Irritation Index = 0.0, non-irritating). The formula is certified 100% free of natural rubber latex, parabens, phthalates, mineral oil, synthetic fragrances, and artificial dyes.
-
Probe Metallurgical Anti-Corrosion Testing : Evaluated in metallurgical testing laboratories under ASTM G48 protocols, confirming Grade 0 pitting and zero electroplating degradation across vacuum-metallized chromium, decorative nickel, 24K flash gold, and titanium treatment probes after 72 hours of continuous anodic-biased current exposure.
-
Microbiological Purity & Preservative Efficacy : Formulated in compliance with USP <51> Antimicrobial Effectiveness Testing, demonstrating rapid 28-day challenge reduction of bacteria, yeasts, and molds without relying on aggressive sensitizing biocides. Certified compliant with USP <61>/<62> microbiological limits: Total Aerobic Microbial Count (TAMC) < 10 CFU/g, Total Yeast and Mold Count (TYMC) < 10 CFU/g, and verified total absence of Staphylococcus aureus, Pseudomonas aeruginosa, Escherichia coli, and Candida albicans.
-
MDSAP & ISO 13485 Manufacturing System Controls : Synthesis reactors, cleanroom storage bays, and automated filling carousels operate under certified ISO 13485:2016 and MDSAP regulatory frameworks (covering US FDA 21 CFR 820, Health Canada, TGA Australia). Unbroken electronic Device History Records (DHR) capture bulk deaeration vacuum levels, rheological viscosity curves, potentiometric pH assays, and fill-weight data across every manufactured lot for full traceability.
Technical FAQ
Q: Why do standard anti-aging facial serums cause electric arcing or trigger device shut-offs when used with microcurrent and RF devices, and how does this serum-gel maintain electrical continuity?
A: The electrical failure of standard cosmetic serums when paired with electrotherapy hardware stems from dielectric impedance mismatch and rapid evaporative film collapse: The Physics of Standard Serum Failure: Everyday anti-aging serums are formulated as lightweight aqueous or silicone solutions with low electrical conductivity (<0.1 mS/cm) and zero defined yield stress: 1. High Interfacial Resistance: Because cosmetic serums contain no structured charge carriers, bulk electrical resistance exceeds 10,000 Ohms across the skin-probe boundary. When a constant-current microcurrent device (50 uA to 400 uA) or multi-polar RF applicator touches the skin, the generator hits its compliance voltage ceiling trying to force current through the high-resistance fluid. Output current collapses, and smart devices shut off, registering an open-circuit error. 2. Micro-Film Evaporation & Sparking: Thin serums lack hygroscopic vapor-pressure suppressors. Under the frictional heat of metal probe passes and skin warmth (34C), the thin fluid layer evaporates within 60 to 90 seconds. The fluid film thins to sub-micron patches, leaving microscopic air gaps between the metallic probe and the skin. Radiofrequency and microcurrent voltages easily exceed the breakdown threshold of these air gaps (3.0 kV/mm), sparking localized micro-arcs that burn the epidermis and tarnish decorative probe electroplating. Our Conductive Serum-Gel Solution: Conductive Face Serum Gel maintains uninterrupted electrical continuity through an engineered ionic-fluid balance: 1. Non-Ionic Organic Electrolyte Reservoir: The serum-gel incorporates bio-fermented sodium polyglutamate and sodium PCA, providing a stable conductivity of 0.6 to 1.8 mS/cm. This lowers interface contact impedance below 2,000 Ohms, allowing microcurrent waveforms and RF energy to flow smoothly into tissue without voltage-rail clamping. 2. Hygroscopic Thin-Film Cushion: A ternary polyol humectant phase (glycerol and 1,3-propanediol) depresses the water vapor pressure, maintaining a continuous 30,000 cP fluid cushion across 15 to 20 minutes of continuous probe movement. Air gaps are eliminated, and current flows across a uniform, low-impedance boundary, completely preventing micro-arcing and hardware open-circuit tripping.
Q: How does the serum-gel protect fragile peptides and vitamins from electrolytic degradation during 15-minute transdermal electroporation sessions?
A: Preserving fragile biomolecules during continuous electrotherapy requires isolating active molecular bonds from Faradaic redox reactions and electrical field shear: The Degradation Mechanism of Peptides Under Electroporation: In transdermal electroporation and galvanic iontophoresis, high-voltage electrical pulses (20V to 40V) pass between the treatment probe and the skin. In basic water-based cosmetic solutions: 1. Electrolytic Water Splitting: Continuous electrical pulses trigger Faradaic electrolysis at the probe surface. Water molecules dissociate into hydrogen ions, hydroxide ions, and reactive oxygen radicals. 2. Chemical Cleavage: These reactive species directly attack the sensitive peptide bonds of anti-wrinkle actives (like palmitoyl tripeptide-5 or acetyl hexapeptide-8). The peptide chains hydrolyze into inactive amino-acid fragments. 3. Electrical Torque Denaturation: High-frequency alternating electric fields apply rotational torque to the charged dipole groups of the peptide backbone. The delicate secondary helical folding unwinds, causing the proteins to lose their specific biological receptor affinity. Our Protective Nanovesicular & Zwitterionic Architecture: Conductive Face Serum Gel safeguards active peptides through a dual-mechanism defense: 1. Lamellar Phospholipid Faraday Shielding: Bio-active peptides and vitamins are pre-encapsulated inside biomimetic lamellar phospholipid vesicles formed from hydrogenated lecithin and 1,3-propanediol. The non-polar lipid bilayer acts as a dielectric shield, deflecting electrical current vectors around the vesicle and protecting the encapsulated peptides from direct electrical field shear. 2. Zwitterionic Radical Buffering: The surrounding aqueous gel matrix is loaded with high-molecular bio-fermented sodium polyglutamate. Its alternating carboxyl and amino side chains act as chemical buffers that absorb free protons and neutralize reactive oxygen radicals before they can breach the phospholipid vesicles. In continuous 40V electroporation stability assays across 30 minutes, this dual-shielding matrix preserved greater than 95% of peptide secondary structure integrity, allowing un-degraded, bioactive anti-aging molecules to penetrate into the viable epidermis and dermis.
Beauty device hardware manufacturers, clinical aesthetic networks, and medical skincare brand directors can request official Certificates of Analysis (COA), 40V electroporation peptide stability HPLC traces, ASTM G48 probe metallurgical anti-corrosion test reports, ISO 10993 biocompatibility testing dossiers, and unbranded evaluation sample packs (including 50 ml and 100 ml airless pump dispensers).
👉 [Request Conductive Face Serum Gel Evaluation Packs]
Hot Tags: conductive face serum gel, China conductive face serum gel manufacturers, suppliers, factory, gel microcurrent, microcurrent gel, best conductive gel for microcurrent, Microcurrent Facial Conductive Gel, ultrasound conductive gel, Ultrasound Conductive Gel for Face
Specifications
| No. | Item No | Volume | Package |
| 1 | TG-65ML | 65ml/2.3oz | 200pcs/carton, Carton dimession: 43cm*36cm*28cm, Gross weight: 14.5kgs |
| 2 | TG-90ML | 90ml/3.2oz | 160pcs/carton, Carton dimession: 43cm*36cm*28cm, Gross weight: 16kgs |
| 3 | TG-100ML | 100ml/3.5oz | 160pcs/carton, Carton dimession: 48cm*40cm*33cm, Gross weight: 17.5kgs |
| 4 | TG-150ML | 150ml/5.3oz | 160pcs/carton, Carton dimession: 48cm*40cm*33cm, Gross weight: 17kgs |
| 5 | TG-250ML | 250ml/8.9oz | 50pcs/carton, Carton dimession: 40cm*30cm*30cm Gross Weight:17kgs |







