Conductive Adhesive Gel

Need to restore TENS pad stickiness? Our high-viscosity conductive adhesive gel (Tacky Gel) renews electrode adhesion, stabilizes fixation, and improves signal quality. Ideal for extending pad life and securing EEG sensors.

The "Liquid Glue" for Medical Electrodes.

TOP-RANK Conductive Adhesive Gel (often called "Tacky Gel") is a specialized electrolyte formula designed to solve the problem of electrode detachment.

Unlike standard scanning gels which are designed to be slippery, this formulation possesses strong tackifying properties. It acts as a conductive bridge that not only transmits electrical signals but also physically bonds the electrode to the skin.

Safety Note: While it functions like a glue, it is NOT a superglue. It is a water-soluble medical adhesive designed for temporary skin fixation.

1. TENS/EMS Pad Restoration (The "Money Saver") Reusable hydrogel pads lose their stickiness over time due to skin oils and dust.

• The Solution: Applying a small drop of our Adhesive Gel to the pad surface instantly revives the tackiness.
• Benefit: It extends the usage cycle of standard electrodes by 2-3 times, preventing premature waste.

2. EEG & EMG Fixation For neurological scanning, cup electrodes need to stay in place on the scalp.

• The Solution: Our gel provides enough viscosity to hold the electrode firmly without the mess of heavy pastes (like Ten20). It lowers impedance rapidly for clear brainwave capture.

3. Difficult ECG Monitoring In Stress Tests (Treadmill) or Holter monitoring, sweat can cause pads to slide.

• The Solution: Use this gel as an "adhesive booster" under the electrode to maintain signal integrity during patient movement.

1. "Tack-Up" Technology The gel is formulated with a specialized polymer that increases in viscosity as it warms to body temperature. It creates a secure, sticky bond that resists gravity and cable pulling, yet remains flexible.

2. High Conductivity (Low Impedance) While it acts like a glue, it is primarily a conductor. We infuse the matrix with balanced electrolytes to ensure it does not impede the signal. It effectively fills the microscopic air gaps between the skin and the electrode, lowering contact impedance instantly.

3. Water Soluble & Clean It is water-based and easy to clean. After the session, it can be wiped off the skin or hair with a simple damp cloth or rinsed with water. It leaves no gummy residue.

🎓 Professional Tip: Use Adhesive Gel only when extra fixation is required (e.g., old pads, hairy skin, or active motion). For normal stimulation with new pads, standard self-adhesive electrodes offer better convenience.

• Viscosity Tuning: We can adjust the "tack level" from Medium Stick (for face) to High Stick (for body).
• Tube Size: 15g / 60g / 100g tubes (ideal for retail sales as a "Pad Refresher").
• Private Label: Brand this as your own "Electrode Extender" or "Conductive Glue".

Stop Electrodes from Falling Off

Don't let loose pads ruin a therapy session or diagnosis. Upgrade to our High-Tack Formula.

Request Tacky Gel Samples

Hot Tags: conductive adhesive gel, China conductive adhesive gel manufacturers, suppliers, factory, Electrode Contact Gel, ecg electrode gel, Gel for Ecg Electrodes, Electrode Gel, Electrode Gel for TENS Pads, Contact Gel for TENS Unit